Sliding fall arrester + stopper on rope with energy absorber

3 multi function products in 1: 1- Sliding fall arrester on braided rope anchorage line ų 10,5 mm equipped with an extension tab with energy absorber and an AM002 carabiner. 2- Stopper on rope: The rope's adjusting device used in the safety bracket (type A) accompanies the user during his changes of position and locks under the action of a static or dynamic load. 3- Stopper on rope: The ascension device on its work support, locks under the action of a load in one direction and slides freely in the opposite direction (type B). Plastic/Steel. Carabiner: Steel. Absorber: Polyester/Polyethylene. Quick link: Stainless steel. EN365 : 2004 Personal protective equipment against falls from a height – General requirements for the instructions for use, maintenance, periodic examination, repair, marking and packaging. EN353-2 : 2002 Personal protection equipment against falls from a height - Part 2 : Guided type fall arresters on a flexible anchor line. EN12841 : 2006 Personal fall protection equipment - Rope access systems - Rope adjustment devices TYPEAType A Rope adjusting device - Adjusting device for safety bracket TYPEBType B Rope adjusting device - climbing device for work support SPECIFIC QUALIFYING CONFORMANCES EN363 : 2018 Personal protection equipment against falls from a height - Personal systems for protection against falls. EN364 : 1992 Personal protective equipment against falls from a height : Test methods.