Tool cabinet with 7 drawers, empty

7 ball bearing drawer with 100% pull-out and capacity of 35 kg Enormous stability due to individual fastening of each drawer 350 kg total load capacity Unpacking - immediately ready to use The high-quality powder-coated professional tool cabinet is always there just when it’s needed! Spending all day running back and forth is a thing of the past. With help from the ergonomic push handle integrated into the plastic tray, it’s quite easy to manoeuvre through the workshop and protects the edges on the corners from collisions. Thanks to its 2 parking brakes on the swivel castors, it remains in place at its destination. More room! The workshop cabinet has seven drawers. Two drawers are extra high and thus provide plenty of space for drills and other large tools. With the hanging slot on the side, additional storage space can be created with the right brackets. All drawers are supported by ball bearings and pull out 100% even at the maximum capacity of 35 kg. This means that getting to your tools is no problem whatsoever. To make sure your professional tool cabinet does not tip over, all drawers lock individually and can also be secured with the central lock. The professional tool cabinet in detail: Total capacity: W 77 x H 97,5 x D 47 cm Drawer internal dimensions: 5x 52,8 cm x 39,8 cm x 55 mm 2x 52,8 x 39,8 x 13,5 cm Total load capacity: 400 kg Load capacity of each drawer: 35 kg Full pull-out: Yes Ball-bearing: Yes Locking mechanism: Individual Central lock: on the side, 2 keys Edge protection: Plastic Castor: 2 swivel castors, 2 fixed castors