Welders trousers Metal splash, grey 58

Trousers in 54% Lenzing® FR, 20% Wool, 20% Polyamide, 5% Aramid, 1% Antistatic fibre, 330 g/m². Equipped with zipper closure and concealed button, two side pockets and one rear pocket closed with flap and Velcro. THE TROUSERS MUST BE WORN IN COMBINATION WITH THE JACKET - Protects during welding operations and aluminium splashes - Its remarkable properties do not limit the softness and breathability Suitable to protect the operator from short contacts with the flame, in presence of low values of convective and radiant heat, in welding operations and related processes and from small splashes of molten metal. The product has been designed and manufactured to comply with Regulation (EU) 2016/425 and subsequent amendments. Protection levels indicated refer to the combination jacket and trousers. The main external fabric is OEKO-TEX® Standard 100 certified Aluminium Industry, Foundries, Cement Industry. Keep in a cool dry place, far from heat sources and direct light. Make sure thegarment is in good condition, undamaged and clean before use. Once you become aware of a damage, you should immediately replace it. We recommend to follow the washing instructions. Category - III EN 1149-5 EN ISO 11611 Class:2 Values:A1 EN ISO 11612 Limited Flame Spread:A1 Convective Heat:B1 Radiant Heat:C1 Molten Aluminium Splashes:D3 Molten Iron Splashes:E3 Contact Heat:F1