Kraftform Kompakt Micro 21 ESD 1, 21 pieces

Kraftform Kompakt Micro set for precision mechanical work. Suitable for the take-up of bits with 4 mm halfmoon drive (Wera series 9) and bits with 4 mm HIOS drive (Wera series 21). Electrical surface resistance of ≤ 109 Ohm for secure protection against electrostatic charge. Manufactured in accordance with DIN EN 61340-5-1. Compact handle/interchangeable blade system for fast blade change. Kaftform Micro handle with twist cap and free-turning zone for rapid twisting, making any time-consuming repositioning of the fingers unnecessary. Power zone with integrated soft zones for the transfer of higher tightening and loosening torque. Precision zone directly above the blade for the right angle for adjustment work. Bits for manual as well as power tool operations. Rapid fixing of the bit: just push the bit into the insert for automatic locking and a secure fit. To change the bit, simply push the sleeve forward and remove. Free-turning sleeve for simple guidance of the tool during the screwdriving process. 1013 Kraftform Micro ESD Bitholding screwdriver 053000040011x 97 mm 851/9 C J PH bits, halfmoon 051346050011x PH 000 x 44 x 1.5 mm 1) 051352700011x PH 00 x 44 x 1.8 mm 1) 051352720011x PH 0 x 44 x 1.8 mm 2) 867/9 C TORX® bits, halfmoon 051352200011x TX 1 x 44 mm 051352210011x TX 2 x 44 mm 051352220011x TX 3 x 44 mm 053453520011x TX 4 x 44 mm 053453510011x TX 5 x 44 mm 867/9 C IP TORX PLUS® bits 051352300011x 1 IP x 44 mm 051352310011x 2 IP x 44 mm 051352320011x 3 IP x 44 mm 053263100011x 4 IP x 44 mm 867/9 IPR TORX PLUS® bits 1x 1 IPR x 44x1.5 mm 3) 872/9 bits for Microstix® screws 050668500011x m x 44 mm 050668510011x 00 x 44 mm 050668520011x F x 44 mm 050668530011x 0 x 44 mm 800/9 C bits 051352650011x 0.23 x 1.5 x 44 mm 051352640011x 0.35 x 2.5 x 44 mm 869/9 Nutsetters 051352240011x 2.5 x 44 mm 1) Optimised for Asian PH screws 2) Size 0 modified according to JCIS 0 (Japanese Camera Industrial Standard) 3) Without bore hole