BESLUX SINCART M-00 18KG

G. Beslux Sincart M-00 is a grease designed for the lubrication of enclosed gear systems, worm gear drives, and other applications requiring a highly stable lubricant with excellent adhesion and long service life. Its special formulation helps optimize operating conditions by reducing noise and vibration while extending the service life of the mechanism. The suitable viscosity of its PAG-based oil provides an optimal balance between fluidity and sealing capability, ensuring proper grease circulation within enclosed gear systems. G. Beslux Sincart M-00 is a long-life grease with a low oxidation rate, suitable for operation over a wide temperature range and under severe service conditions. The product is compatible with most rubber and elastomer materials but must not be mixed with greases based on mineral oils or other types of synthetic oils. Applications: Enclosed gear systems Worm gear drives Power transmission systems Properties: Excellent lubricating performance Wide operating temperature range High wear resistance Long service life Suitable for high operating speeds Excellent mechanical stability Reduces noise and vibration Compatible with rubber and elastomer materials Precautions: Follow standard safety procedures when handling lubricants. Keep the container tightly closed to prevent contamination. Do not mix with greases of different types or compositions. Physical and Chemical Characteristics Characteristic | Standard | Typical Value Color | – | Ivory Thickener | ASTM D-128 | Lithium Base Oil | ASTM D-128 | Synthetic, PAG NLGI Consistency | DIN 51818 | Grade 00 Penetration at 25°C | ASTM D-217 | 415 (0.1 mm) Worked Penetration (60 strokes) | ASTM D-217 | 420 (0.1 mm) Dropping Point | ASTM D-566 | 185°C Four-Ball Test – Weld Load | IP-239 | 160 kg Four-Ball Test – Wear Scar (1 h / 40 kg) | IP-239 | 0.45 mm Four-Ball Test – Wear Scar (80 kg) | IP-239 | 0.65 mm SRV (100 N, 80°C, 1 h, 1 mm, 50 Hz) – Minimum Coefficient of Friction | ASTM D5707 | 0.127 SRV – Maximum Coefficient of Friction | ASTM D5707 | 0.128 SRV – Final Coefficient of Friction | ASTM D5707 | 0.128 SRV – Ball Wear Scar | ASTM D5707 | 0.36 mm FZG, A/8, 3/90 | ASTM D5182 | >12 Copper Corrosion | ASTM D4048 | 1a Oxidation Stability at 100°C | ASTM D-942 | 0.4 kg/cm² Evaporation Loss, 22 h at 100°C | ASTM D-972 | 1% Operating Temperature | – | -45°C to +150°C Valokuvat ja videot ovat havainnollistavia.