UUSI!
Arvostamme aikaasi.
Open MenuTuoteryhmätOpen CartOpen Search
search
Helsinki +358 9 3881 500Kaarina +358 2 276 5800
Asetukset
Verkkosivusto (maa)
Toimitusmaa
kieli
KampanjatYhteystiedot
Ostoskorisi on tyhjäLisää tuote tai
siirry kotisivulle
ILMAINEN TOIMITUS
jos tilaus ylittää 49€ (enintään 30 kg)
Minun Stokkeri
Kirjaudu
searchHae
SAW BLADE NN-SYSTEM DP 300X2.5/2X30 Z44 HR, CMT

SAW BLADE NN-SYSTEM DP 300X2.5/2X30 Z44 HR, CMT

235.300.44M&CMT , C   GTIN: 8019296066586
Thanks the new minimization of gullets design this blade succeeded in reducing the noise of idling by
upto 15 dB(A) compared to conventional carbide saw blades. With a noise level of just around 70dB(A) when idling, the wearing of hearing protection is outdated.

New industry standard with universal application in countless materials and suitable for all chop saws
anand portable machines, table and vertical panel sizing saws, CNCs and through-feed installations

The special hollow back tooth configuration (HR) guarantees an excellent cutting quality.

The teeth are surprisingly thin! The cutting width is a mere 2,5 mm and they generate noticeably lower
cutting pressure and therefore also require less power during usage. Resharpenable max 2 times.

The lifetime is 20X longer than carbide blades thanks to the diamond tips.
Lue koko tuotekuvaus →
  • Tuotekuvaus
  • Thanks the new minimization of gullets design this blade succeeded in reducing the noise of idling by
    upto 15 dB(A) compared to conventional carbide saw blades. With a noise level of just around 70dB(A) when idling, the wearing of hearing protection is outdated.

    New industry standard with universal application in countless materials and suitable for all chop saws
    anand portable machines, table and vertical panel sizing saws, CNCs and through-feed installations

    The special hollow back tooth configuration (HR) guarantees an excellent cutting quality.

    The teeth are surprisingly thin! The cutting width is a mere 2,5 mm and they generate noticeably lower
    cutting pressure and therefore also require less power during usage. Resharpenable max 2 times.

    The lifetime is 20X longer than carbide blades thanks to the diamond tips.
    Kuvien tarkoitus on havainnollistava.
    + näytä enemmän
       

      Samankaltaiset tuotteet

       
      Stokker on Suomessa ja Baltiassa toimiva ammattilaisten suosima työkalujen ja koneiden myynti- ja huoltoliike
       
       
       
       
       
      Tiestikö, että 92 asiakasta sadasta suosittelisi Stokkeria ystävälleen tai kollegalleen?
      Ära vajuta
      Minun Stokkeri
      Sähköposti
      Unohditko salasanasi?