UUSI!
Arvostamme aikaasi.
Open MenuTuoteryhmätOpen CartOpen Search
search
Kaarina +358 2 276 5800
Asetukset
Verkkosivusto (maa)
Toimitusmaa
kieli
Ostoskorisi on tyhjäLisää tuote tai
siirry kotisivulle
ILMAINEN TOIMITUS
jos tilaus ylittää 49€ (enintään 30 kg)
Minun Stokkeri
Kirjaudu
searchHae
Electrode-welder WSE 1000 + accessories, Scheppach

Electrode-welder WSE 1000 + accessories, Scheppach

5906602903&SCHEP , B   GTIN: 4046664073710
The Scheppach inverter-welder WSE1000, is ideal for the DIY enthusiast. The welding current can be controlled from 10 to 130A in order to provide exactly the right power for every purpose.

Innovative inverter technology for longer duty cycle, ultra-compact size, and smoothest welding
Easy, homogeneous bonding of alloy and non-alloy steels, stainless steel and cast iron
The arc force function monitors the welding current and the welding voltage to ensure an even performance at all times
The increased striking voltage with hot start function ensures a stable arc in seconds
Effective protection against overheating is provided by a thermostatic cut out with warning lamp
Long work sessions are also possible thanks to a fan cooling system
Included electrodes, chipping hammer with a wire brush, welding shield, and shoulder harness

Dimensions L x W x H: 280 x 120 x 200 mm
Electrode thickness: 1.6 – 3.2 mm
Welding current: 10 – 130 A
No-load voltage: 85 V
Duty cycle: 25%
Electrode Cables: 3 m
Ground Clamp Cable: 2,5 m
Motor: 230 V~ / 50 Hz
Lue koko tuotekuvaus →
  • Tuotekuvaus
  • The Scheppach inverter-welder WSE1000, is ideal for the DIY enthusiast. The welding current can be controlled from 10 to 130A in order to provide exactly the right power for every purpose.

    Innovative inverter technology for longer duty cycle, ultra-compact size, and smoothest welding
    Easy, homogeneous bonding of alloy and non-alloy steels, stainless steel and cast iron
    The arc force function monitors the welding current and the welding voltage to ensure an even performance at all times
    The increased striking voltage with hot start function ensures a stable arc in seconds
    Effective protection against overheating is provided by a thermostatic cut out with warning lamp
    Long work sessions are also possible thanks to a fan cooling system
    Included electrodes, chipping hammer with a wire brush, welding shield, and shoulder harness

    Dimensions L x W x H: 280 x 120 x 200 mm
    Electrode thickness: 1.6 – 3.2 mm
    Welding current: 10 – 130 A
    No-load voltage: 85 V
    Duty cycle: 25%
    Electrode Cables: 3 m
    Ground Clamp Cable: 2,5 m
    Motor: 230 V~ / 50 Hz Kuvien tarkoitus on havainnollistava.
    + näytä enemmän
       

      Samankaltaiset tuotteet

       
      Stokker on Suomessa ja Baltiassa toimiva ammattilaisten suosima työkalujen ja koneiden myynti- ja huoltoliike
       
       
       
       
       
       
      Tiestikö, että 92 asiakasta sadasta suosittelisi Stokkeria ystävälleen tai kollegalleen?
      Ära vajuta
      Minun Stokkeri
      Sähköposti
      Unohditko salasanasi?