UUSI!
Arvostamme aikaasi.
Open MenuTuoteryhmätOpen CartOpen Search
search
Kaarina +358 2 276 5800
Asetukset
Verkkosivusto (maa)
Toimitusmaa
kieli
0
Ostoskorisi on tyhjäLisää tuote tai
siirry kotisivulle
ILMAINEN TOIMITUS
jos tilaus ylittää 49€ (enintään 30 kg)
Kirjaudu
Kirjaudu
searchHae
Plunge saw DCS520NT, Flexvolt, 165mm,carcass in TSTAK
Plunge saw DCS520NT, Flexvolt, 165mm,carcass in TSTAK

Plunge saw DCS520NT, Flexvolt, 165mm,carcass in TSTAK

DCS520NT&DW , C   GTIN: 5035048642986
Without battery and charger
No load speed: 1750-5000 rpm
Blade diameter: 165 mm
Blade bore: 20 mm
Bevel capacity: 47 °
Max. depth of cut at 90°: 59 mm
Max. depth of cut at 90° [with guide rail]: 55 mm
Max. depth of cut at 45°: 44 mm
Max. depth of cut at 45° [with guide rail]: 40 mm
Weight: 5,1 kg

Parallel plunge allows the user to maintain a smooth and constant hand position while cutting
A 42 tooth blade gives a fine and accurate finish with very little breakout in laminates
Rail adjustment allows the saw to be adjusted accurately to the rail
The anti kickback function stops the saw from moving backwards along the rail and helps stop the saw from climbing out of the work piece when making plunge cuts
Variable speed allows the correct speed to be set for different types of materials
The enclosed guard gives a 90% dust extraction capability
59mm depth of cut allows the trimming and sizing of most common door sizes
54V XR FLEXVOLT giving the Power of the Cord - without the Cord

Standard:
42 tooth precision circular saw blade
TSTAK case
Lue koko tuotekuvaus →
  • Tuotekuvaus
  • Tuotevideot
  • Without battery and charger
    No load speed: 1750-5000 rpm
    Blade diameter: 165 mm
    Blade bore: 20 mm
    Bevel capacity: 47 °
    Max. depth of cut at 90°: 59 mm
    Max. depth of cut at 90° [with guide rail]: 55 mm
    Max. depth of cut at 45°: 44 mm
    Max. depth of cut at 45° [with guide rail]: 40 mm
    Weight: 5,1 kg

    Parallel plunge allows the user to maintain a smooth and constant hand position while cutting
    A 42 tooth blade gives a fine and accurate finish with very little breakout in laminates
    Rail adjustment allows the saw to be adjusted accurately to the rail
    The anti kickback function stops the saw from moving backwards along the rail and helps stop the saw from climbing out of the work piece when making plunge cuts
    Variable speed allows the correct speed to be set for different types of materials
    The enclosed guard gives a 90% dust extraction capability
    59mm depth of cut allows the trimming and sizing of most common door sizes
    54V XR FLEXVOLT giving the Power of the Cord - without the Cord

    Standard:
    42 tooth precision circular saw blade
    TSTAK case Kuvien tarkoitus on havainnollistava.
    + näytä enemmän
       

      Samankaltaiset tuotteet

       
      Stokker on Suomessa ja Baltiassa toimiva ammattilaisten suosima työkalujen ja koneiden myynti- ja huoltoliike
       
       
       
       
       
       
      Tiestikö, että 92 asiakasta sadasta suosittelisi Stokkeria ystävälleen tai kollegalleen?
      Ära vajuta
      Kirjaudu
      Sähköposti
      Unohditko salasanasi?